Simon 3 security manual

The System Status button is used to give information on system activity. Arm Turn on If you close the designated door behind you when you exit, you will have to disarm the system upon reentering. Leave the designated door open while using the Quick Exit feature. The Quick Exit feature is used when someone wants to briefly leave while the home is still armed i.

This feature needs to be enabled by your installer. When you press the Disarm button the panel will Arm Motion Sensors light will blink and the exit delay will begin. Upon reentering your home the entry delay will begin. Status beeps will sound.

Enter your access code using the Code buttons. Panel announces, System disarmed and the Disarm light will be lit. Enter your Master Access Code while the system is disarmed. Panel Indicator Lights Numeric Pager Canceling and Preventing Accidental Alarms.. Canceling Accidental Alarms Guidelines for Preventing Accidental Alarms 6. How to Use an Off-Site Phone How to Gain Access to the Control Panel Phone Commands How to Use Your Touchpads Programming Your System Programming Instructions Access Codes Light Control Programming Options Option 01 - Panel Beeps Option 02 - Panel Voice Option 03 - Latchkey Time Option 36 and Sensor Activated Light Lockout.

Start and Stop Times Option 41 - Voice Chime Option 42 - Speaker Level Option 43 - Pager Phone Number Option 55 - Status Sounds Trouble Beeps AC Power Failure System Battery Failure Sensor Failure Sensor Low Battery Sensor Open Sensor Tampered Option 50 Detected Siren 1 or 2 Failure System Access Alarm Testing Sensors Numeric Pager You may program your security system to send a numeric message indicating system activities to your pager.

The system will send the message twice. Use the following table to determine what the numeric message is reporting. Simon Security System10 Canceling and Preventing Accidental AlarmsOne of the biggest concerns you might have regarding your security system, is causing an accidental alarm. Most accidental alarms occur when leaving the residence after arming the system, or, before disarming the system upon your return. Canceling Accidental Alarms There is a communicator delay Dialer Delay of 30 seconds programmed into this panel.

The panel will delay 30 seconds before dialing the central monitoring station or a Simon Security System11 If you are interactive with your panel and the panel hangs up on you, the system is calling in a report to the central monitoring station or a pager, due to an action made by you or someone at the security system site. How to Use Your Touchpads Touchpads are used to control the security system from any location within or near your home.

System Status Press Press Lights On button once. Press the number of the lamp module you want to turn on. Panel will announce, light on. Press Lights Off button once. Press the number of the lamp module you want to turn off. Panel will announce, light off.